OSC Annual Chili Cookoff
Happy Veterans Day!
PVS Structures is thrilled to be a part of the new Omaha Performing Arts Center (OPA), a music venue in the downtown Omaha area. It’s located in the newer Capitol District.
Mark Radke, our Vice President and General Manager of NPS/NPF recently celebrated 40 years of service. We sat down with Mark to ask him a few questions on his tenure here.
MVS was featured on the local news, supporting our very own, Mike Jordan. Please see the below news article and attached video. As a company, we are honored to be able to support all of our valued employees. Missouri Valley Steel employee, Mike Jordan, was diagnosed...
PVS Structures is proud to be a part of Habitat for Humanity -Brew Ha Ha 2021. This years event was held at Sterling Ridge, close to several buildings that contain PVS steel. PVS Structures brews several kinds of beer as a team building project. This year included a...
Last month MVS held it’s annual Cornhole tournament.
Owen Industries is proud to support the United Way of Fargo!
Congratulations to Doug Brennan for his 35 years of Service at NPS Metals a division of Owen Industries. Doug is currently the Quality Manger for both NPS Metals and NPF Finishing. He started his career running various machines from Press Brake, Flame Cutter, to...
PVS Structures was proud to be a part of the new Valmont Headquarters project.
Owen Industries is a proud sponsor of the Boys & Girls Clubs!
PVS Structures is working on the Union Bank and Trust New Office Building that’s roughly 645 tons of fabricated steel.
Norther Plains Steel T-ball
After having completed the Stingray addition to the zoo, the Aviary needed re-work
NPS Metals is excited to support the American Heart Association Heartwalk! We walk to raise funds for science that help us live longer, be healthier and make more moments possible, helping to prevent heart disease and stroke. We are thankful to participate in this...
The Luminarium is being showcased as an anchor point to the newly developing area with green spaces to bring the whole family.
Owen Industries in the news
Congratulations to Tony Aniello for 25 years of service at Owen Industries. Tony is currently the Production Manager for PVS Structures. His career started as a Connection Design Engineer. He moved into Project Management after two years where he managed Project...
Owen Industries/PVS Structures is excited to be a part of the new Omaha Performing Arts Campus Expansion.
Owen Industries is pleased to be a part of the Boys & Girls Club of Sioux City! We are happy to help sponsor this year “Youth of the Year”.
Owen Industries would like to congratulate Mark Donnelly for
Owen Industries has officially renamed the road in front of PVS Metals (Carter Lake, IA) “Dobson Drive”.
Owen Industries latest addition in quality equipment is the new Hexagon Absolute Arm. This 7-axis probe and scanner combo supports quick scans as well as Part=Cad pulled data point using solid models and comparing nominal to actual data in real time. The PCDMIS...
While 2020 keeps rolling out the hits… MVS Metals has been rolling as well!
Keith Siebels-VP Sales /GM PVS Metals and Ron DeBord-VP Human Resources enjoyed a tour of CAM-“Center for Advanced Manufacturing”- hosted by Metro Community College officials.
Owen Industries is excited to be a part of the Henry Doorly Zoo’s new state of-of-the-art exhibit, Owen Sea Lion Shores!
Bill worked for PVS-METALS as a driver for his entire 13 years and 4 months.
Ron Bolyard 30 year tenured employee retire today. He operated our Messer 2016 plasma/flame machine.
Owen Industries Hand Sanitizer Stands
Let me tell you a story about a recent college graduate that applied for the job that did not exist. He is unassuming, yet resolute.
Northern Plains Finishing is currently painting temporary-use hospital beds for COVID-19 patients
Owen Industries is making every effort to keep our employees, vendors and customers safe during the COVID-19 pandemic
We’re fabricating eight 75-0 beam spans for Iowa Interstate Railroad that are being installed over the Raccoon River just West of Des Moines, IA.
PVS Structures is excited to share that our work is featured on the March 2020 cover of AISC’s Modern Steel Construction magazine
A strong partnership exist between Owen industries and Iowa Western Community College. The combination of RTI-related training instruction and OJT-on the job training has produced a successful Paxton Vierling Steel Structures-Welder Apprenticeship Program, certified by the USDOL-United States department of labor.
PVS is building the Valmont Headquarters building located at 250 N. Applied Parkway in Omaha
Owen Industries attended two additional schools last week for Career RockIt.
Ron DeBord-VP Human Resources spent the day visiting Central Community College-Hastings Ne
PVS Structures is assisting in building the new stingray complex at the Henry Doorly Zoo. The project will be completed in three phases. Though the project is only about 120 tons of steel, it is architecturally challenging as the building itself is in a curved shape...
Happy Holidays from Owen Industries and Paxton & Vierling Steel
PVS Structures Chief Engineer, Mark Holland, PE., has a delightful and humorous article featured in the November 2019 AISC magazine Steelwise. Check out his insightful and constructive thoughts on page 16 in the link below;...
Thank you Owen Industries Employees!
Happy Birthday to our Senior Vice President of Sales and General Manager of PVS Metals, Keith Siebels! Enjoy your day!
Did you know that PVS has its own Soccer team made up of PVS employees?
Happy Halloween from Owen Industries!
Developing the next Generation- PVS has always had a firm commitment to education and helping develop our community
Owen Industries was the proud host of a Future Ready Iowa Summit on Tuesday, October 22 at its PVS-Metals
Owen Industries recently installed two Level 2 EV charging stations outside of their PVS Structures office building
If you are looking for a cool venue to eat and drink stop by the Aksarben Inner Rail and admire this work
PVS would like to thank our customers and partners who attended our breakfast seminar. This year we partnered with Paul Johnson, PhD, PE, Design Build Supervisor at the Nucor Detailing Center
Owen Industries President Tyler Owen was one of 40 donors who raised the money to fund the expansion of the welding fabrication program at Westside.
“This is less of a donation as it is an investment. We already have some of these kids that graduated working in our shop,” Owen said.
Owen Industries was recognized today as a proud sponsor the new “TradeWorks Academy” at Abraham Lincoln and Thomas Jefferson High Schools in Council Bluffs, IA.
Owen Industries takes and active role growing our skilled workforce within our local community. One way of doing that is to support students
Owen Industries has been a family owned company for the better part of a century, and that culture of togetherness is lived by its employees.
Cincinnati Incorporated (CI) selected PVS Metals as a host facility to demonstrate their Small Area Additive Manufacturing (SAAM) 3D printer.
PVS welcomed the Nebraska Cornhuskers onto the field at Memorial Stadium on Saturday, September 14th when they played Northern Illinois. Dan Cimino won the opportunity to be on the field with the players as they entered.A raffle was held for this amazing...
Thank you to all who participated in this year's 13th Annual Habitat for Humanity Brew Haha event. PVS enjoyed being a part of the success!
Paul Rhoten stated with PVS Structures November 1, 1971 as a Machine Operator. He finished his career as Manager of the Paint Shop.
PVS Structures is excited to be a part in the creation of the new Capitol District in downtown Omaha. This structure is currently slated as a multi-use addition to the Capitol District. Though not yet complete, the addition will provide more restaurants or retail...
Are you ready for Brew Haha? Our crew has been busy making you some amazing beer for this upcoming event.
PVS Structures has the last beam installed at Westside High School.
See why Owen Industries is the Midwest’s one-stop shop for metal fabrication!
The John D. Griffith’s Fund helps deserving students financially transform their lives with the power of a quality education.
The Westside Engineering Labs expansion project will significantly expand the current welding, fabrication and manufacturing program at Westside High School
Georgia Power Company reached a major milestone for the Vogtle 3 & 4 nuclear project with the placement of the middle containment vessel ring for Unit 4. Weighing more than a jumbo jet, the 2.4 million-pound, 51-foot tall containment vessel houses the reactor vessel.
Exciting changes are occurring at PVS Structures. These moves will make our company stronger and better poised for growth, ultimately providing more value to our customers.
PVS Structures had a great time hosting Whiting-Turner’s summer interns for tour of our shop
St. Margaret Mary's Robotics Class, made up of forty 4th through 8th graders, toured PVS to see how robotics are used in the steel industry. Students viewed the PVS Structures cutting edge robotic technology in action. The students also toured the PVS...
The Pancake Man came to PVS on Tuesday. Staff worked to ‘catch’ their breakfast, flying flapjacks were enjoyed by all!
Ten years ago, The Sioux City St. Patrick’s Day Parade was created by a group of local Irish Siouxlanders who wanted a fun way to bring the community together, and it’s been going strong ever since.
Mike Flach will be retiring from Northern Plains Steel on Thursday, March 14th after 33 ½ years of service.
The zoo is beginning work on a huge transformation of the exhibit that should be completed by 2020/2021. We can’t wait to see it!
Tuesday, February 26th hosted the 2nd Annual Chili Feed at MVS Metals. Staff enjoyed the chili feed and voted for the best chili!
February brought the 2nd Annual Chili Cook-off to PVS. Our staff was prepared for the fierce competition and ready to claim the title of best chili!
January Sunset Over PVS
Dewayne Bright started at the PVS Service Center in 1999, loading trucks on the night shift. Dewayne was recently promoted and is now the West Bay Forman for PVS-Structures.
Across the nation, thousands of individuals are celebrating National Apprenticeship Week, which runs November 12th through the 18th.
Friday, October 12, 2018 – Paxton & Vierling Steel/Owen Industries hosted a group of Westside High School students for a day long tour as a part of their school welding program.
MVS – Metals Inaugural Cornhole Tournament.
MVS held their first Cornhole Tournament on October 18th and 19th.
Owen Industries Sponsors Skills USA
PVS held its annual horseshoe tournament the first two weeks of October. Thirty-two employees signed up. The competition was fierce, and everyone had fun.
PVS is working with McNeil Company to bring a 100,000-square-foot office, retail and restaurant building to the corner of 67th Street and Mercy Road.
Owen Industries honors first welders of apprentice program
Celebrating the retirement of Rod Hall
Daryl Jilek’s 35th Anniversary
PVS Metals and PVS Structures recently received the President’s Award for Commitment. The award celebrates 20 years of registration to ISO 9001.
PVS is proud to announce an expansion to our in-house fleet of tractors, trailers and haulers.
In 1915, the corners of 36th & Farnam streets in Omaha, which is part of the “Blackstone District” looked drastically different. In fact, this area was once considered West Omaha, which would make most present-day Omaha residents laugh out loud
Beginning in January of 2013, PVS Structures accepted the responsibility to provide structural steel on the first new nuclear plants to be built in the United States since the late 1970’s.
We are excited to announce the release of the official history book of OII and P&V. This book has been decades in the making, beginning with a rough draft commissioned by Ed Owen in the 80s, and ending with its publication by our friends at Legacy Preservation this summer.
Owen Industries is proud to support The Meyer Foundation for Disabilities by participating in the 2018 Owl Ride.
PVS Structures has led the steel fabrication industry since 1885. We are growing and adding new equipment that save you money and time! Introducing the Gemini-Ficep HD 36 Plate Processor.
The Owen Foundation and Owen Industries offers scholarships
PVS Metals’ maintains a PPM of under 300 with a John Deere PPM of 0.
Arlin Vanderwerff retired from Northern Plains Steel on Wednesday, May 30th after 33 years with the company.
PVS Structures successfully fabricates and delivers 94’ TPG and two 59’ Wide Flange Beam Spans to a close-fitting project site for our Class 1 partner in Omaha.
Bob White started with Owen Industries February 9, 1976.
PVS around the world. On my recent trip to Scotland I visited the Ancient and Royal St Andrews Golf Club.
PVS Structures is honored to be a part of a much needed upgrade of the current VA Hospital here in Omaha. We look forward to working with McCarthy and Heritage on this incredible project.
MVS Metals uses the most advanced fibre and tube lasers and waterjet and plasma cutting technology to cut any shape in a variety of materials.
PVS/Owen Industries is excited and proud to support the 10th Anniversary of the Maha Music Festival!
Friday, April 27th – Six Westside High School Students toured the PVS Metals and Structures facilities as a part of their high school welding class.
PVS Structures is Fabricating Multiple Bridge Structures on Chicago’s Metra Commuter Rail Network
On Saturday, April 14, 2018 PVS-Metals hosted a Job Fair for the 20+ positions that are currently open including a new 3rd Shift. The turnout was a success with 39 individuals attending.
This past Saturday marked the 10th annual Sioux City Saint Patrick’s Day Parade! The weather cooperated, and the turnout was amazing, with over 6,000 people lining the 10-block route in downtown Sioux City. This was the first year for MVS Metals participation, and the results were nothing short of spectacular!
We Like Happy Railroad Customers! PVS Structures fabricated this Bridge for a short line in Illinois. The project delivers this week.
On February 20th 2018, Northern Plains Finishing hosted the Minn-Dak Manufactures Association for a luncheon and meet and greet.
PVS Structures in the news!
Union Pacific contacted PVS Structures after a pier was damaged by a barge on the Mississippi River, in St. Paul, MN. Upon collaboration, an accelerated steel design and fabrication plan was developed.
Northern Plains Steel also attended to donate $1,000 to Make-A-Wish
Rick Brendel started with PVS in May 1985. Rick started in the Accounting department and has been with the company for 32 years. His job title started out as Account Manager, and promoted to Controller.
We interviewed Rick on his experiences with PVS.
PVS Structures welcomed four new welding apprentices in October. This is the second year of the welder apprenticeship program. The program consists of on-the-job training as well as worksite classroom training
PVS Structures Hosts Concordia High School Principles of Engineering Class. Concordia’s Matt Mueller brought 23 students to PVS Structures to learn about steel and custom steel fabrication.
Owen Industries is proud to announce that each of our divisions’ have recently upgraded their quality management systems to the requirements of ISO 9001:2015.
The refurbished Dodge Street Overpass in Omaha, Neb., celebrated its 50th anniversary with a rededication ceremony today.
PVS is supplying approximately 900 tons of structural steel by the end of November.
In addition, the board welcomes a new director, Tyler R. Owen, general manager of Paxton & Vierling Steel, Structures Division, and president of Owen Industries Inc., Carter Lake, Iowa. All were elected to serve two-year terms at AISC’s annual meeting in September in Chicago.
PVS nuclear team celebrating the delivery of the last C8 trunk on Oct 17th.
Owen Industries is excited to be a partner with Kemper for European distribution and production of the Slagger table. Shown at the Kemper booth during the Schweissen-Schneiden show in Dusseldorf, Germany is a small, single blade unit — many thanks to all of you who inquired about the system.
The HDR Topping out ceremony was earlier this week, with the final beam erecting yesterday
A little something to brighten up a dreary Monday…..
Ed Korbel started with PVS as CFO in March 1997, he retired August 2017 after 20 + years of service. We interviewed Ed on his tenure with OII.
In keeping with our commitment of continuous improvements through training and education, PVS Metals employees participated in Punch Operator Training.
Hollow Structural Sections (HSS), Tube Steel, Structural Tubing and Steel Pipe, just to name a few, are all commonly used terms in the Steel Industry. While it may have many names, and a million times as many uses, there is one thing for certain: We would be lost without it.
Many of the Owen Industries/Paxton & Vierling Steel staff were able to enjoy viewing this once in a lifetime event.
As you can see from the photos, another PVS project played a starring, if silent, role in the latest Maha Music Festival.
Gears: A Stable of Manufacturing Lapping Carrier Gears have long been a staple in the building blocks of human civilization. Our early ancestors used wind and water power with a combination of gears to grind grains, seeds, nuts and beans into flour. They used gears to...
Owen Industries welcomes Delta. Owen Industries met Delta recently. Delta is the new Carter Lake Police Departments K-9 Officer.
Fundamentals of Forming class for PVS metals brake operators covers safety aspects of brakes, programing of new parts, corrections and machine adjustments…..
PVS Structures was selected to fabricate a Through Plate Girder (TPG) Span, 114’ in length for Iowa Interstate Railroad. Steel fabrication was in accordance with AREMA and AISC specifications.
PVS Structures is making “new connections” with Omaha’s most distinguished construction firms while fabricating HDR’s new World Headquarters, in Omaha’s Aksarben Village.
Jerry Spiekermeier started with Northern Plains Steel 6/25/84. Jerry’s first position was inside sales, in the 90’s……
Northern Plains Steel Finishing Company has recently completed the installation a third Colmet/Parker Ionics Powder Coating Spray Booth to allow us to do instant change color without interrupting current production levels.
Girders for Hawkins Construction Company. Picture was taken immediately after erection, and readying safety cables. Note that the safety cable posts are custom engineered by HCC and coordinated with PVS for anchoring. HCC + PVS = Quality + Safety, and ahead of schedule!
Owen Industries/Paxton & Vierling Steel hosted a day long tour for eight Westside High School Welding Program students. The students met with several different departments to learn the full process of steel fabrication; from raw material to final product. Students...
Carter Lake, Iowa-based Owen Industries (an AISC member) is now an official registered apprenticeship sponsor and offers a three-year, competency-based welder apprenticeship program
On March 29th, MVS Metals celebrated making their 1,000th cutting table with a lunch for their employees.
Owen Industries/PVS Structures ships a bridge girder for Iowa Interstate Railroad, to the project site in Des Moines. This TPG weighs 80,000 pounds and is 114’ long!
U.S. Senator Joni Ernst toured Owen Industries on Thursday, April 20th. Senator Ernst visited both the PVS Metals Service Center and PVS Structures Division.
Take a look at what was shipped today! PVS Structures fabricates and delivers another bridge for the local Class 1 Railroad. The bridge pictured is 69 feet long. It will ship out in 2 oversized sections and weighs approximately 100 Ton. Did you know that PVS...
Shari Blackburn started with Missouri Valley Steel sale team in December 1994. She transitioned to the purchasing department and will be retiring in June 2017 after almost 23 year of service. We interviewed Shari on her experience with MVS. Owen Industries: What did...
Rotational Molding is an age old manufacturing process in which a hollow mold is filled with softened material and rotated in order to disperse the material evenly within the mold to produce a hollow part. Humans come into contact with, and often use a variety of...
Owen Industries Welder Apprentice Program Apprentice Interview: Brad Dittman Carter Lake, Iowa-based Owen Industries (an AISC member) is now an official registered apprenticeship sponsor and offers a three-year, competency-based welder apprenticeship program. In...
Up close and personal with a Slagger Table inventor from MVS
Owen Industries utilizes a fleet of hydraulic press brakes and other forming equipment From simple 90-degree bends to complex sequences with 10 or more bends, our press brakes can form small and large parts up to 750 tons and 18-feet long. Our versatility, together...
Carter Lake, Iowa-based Owen Industries (an AISC member) is now an official registered apprenticeship sponsor and offers a three-year, competency-based welder apprenticeship program. In August the company began an interview and selection process, seeking four welder...
Owen Industries Welder Apprentice Program Carter Lake, Iowa-based Owen Industries (an AISC member) is now an official registered apprenticeship sponsor and offers a three-year, competency-based welder apprenticeship program. In August the company began an interview...
Steel, by virtue of its high recycled content and capacity for reuse, is the ideal structural Steel for projects seeking to meet sustainable goals. Since the creation of the Leadership in Environmental and Energy Design (LEED) rating system by the United States Green...
Bill Hollis worked for Owen Industries from August 1970 to August 2015. We interviewed Bill on his 45 years of service. Owen Industries: What did you value most about your experience working at Owen Industries during the many years of your tenure? Bill Hollis: Knowing...
Owen Industries utilizes several types of CNC Press Brakes to accommodate a demanding range of metal bending requirements and volumes.
Press Brakes accommodate a demanding range of metal bending…..
Our Red Bud machine which is the finest heavy gauge stretcher leveler in the industry. It stretches material beyond its yield point to remove stresses introduced at the mill, including coil set, crossbow, edge wave and center-buckle, so your lasers and other...
Many steel fabricators have been resistant to apply steel coatings in the fabrication shop. The reasons range from bottleneck issues to the inability to control the environmental conditions. Some fabricators begrudgingly accept the coating portion of a fabricated project but have not made it a specialty…..
MVS has the solution you’ve been looking for…..
Why spend lots of money and wait several weeks on proprietary catalog items when all you need is a simple non-slip surface? PVS Metals can create, and customize, a variety of patterns and depths, for your individual product needs. In some cases we can turn your...
PVS worked with the Kiewit Building Groups "Special Projects Division" to produce landmark signs for the new Walter Scott Jr. Campus on the University of Nebraska-Omaha grounds. The project was completed weeks before scheduled partially due to our precise water-jet...
PVS Structures, in partnership with the UP and other Class 1 Railroads, continues to help build out America's infrastructure. An article with great photos and details can be found here: Bayou Lafourche Historic Rail Project.
Coming soon! 6K Fiber Laser Technology, capable of processing 10′ x 40′ material up to 1″ thick…….
PVS Salutes Veterans…..
MVS Metals – A Division of Owen Industries, hosts largest Water Jet Table in the country……
Check out our SidePlate Mock-up! PVS Structures educational and instructional tool…..
Original ski lift chairs manufactured at PVS Omaha facility…..
Owen Industries offers three-year, competency-based welder apprenticeship program…..
Owen Industries hosts Greater Omaha Chamber tour for Bellevue West High School students……
Saturday, October 15th marked the 37th Annual BRIDGE DAY! PVS Structures is proud to be a part of and celebrate our bridge accomplishments! PVS Structures partnered with a Class 1 Railroad to fabricate a new bridge under emergency response conditions; dispatching...
MVS Metals creates Walter Scott campus sign
We are excited to announce that Nebraska has formally recognized Steel Day! Celebrations are Nationwide and promote industry changes and trends that affect detailers, fabricators and engineers. This is an exciting day and we look forward to celebrating what we do...
A big shout out to AISC for their great article recognizing old businesses! Read the article here!
Thanks to everyone for supporting the Habitat for Humanity event last night at Stinson Park - a beautiful night made for an incredibly enjoyable event!
Company Honored for its Commitment to Excellence and Quality Carter Lake, IA — Paxton & Vierling Steel Co. (PVS), a wholly owned subsidiary of Owen Industries, was recognized for outstanding work on projects by Bechtel’s Nuclear, Security & Environmental...
Last year, PVS was recognized for outstanding work on projects by Bechtel’s Nuclear, Security & Environmental global business unit at the Bechtel Subcontractor and Supplier Recognition awards. The awards recognize subcontractors and suppliers who supported...
With a fresh new look, a fresh new website, it's time we added some new fixtures! Check out the slide show below for a couple of the new enhancements around PVS-Metals. This is just a teaser, more of our new metals center yet to come... Delivery day for...
Last week, we had the fantastic pleasure of having Iowa’s United States Representative David Young come to our shop and take a tour. He was able to see both our Structures Division and our Metal Service Center across the street. It was wonderful meeting him and to...
Last week, Paxton & Vierling Steel Co. was the venue of choice for Opera Omaha's 2016 gala. With a few cosmetic tweaks, professional lighting, tables, chairs, and a whole bunch of talent, our North Bay was transformed into a thing of beauty. The industrial look...
Truss Bustin’ is an annual event sponsored by the Nebraska Section of the American Society of Civil Engineers (ASCE) and the UNO Student Chapter that challenges Omaha-area high school students to design and construct a balsa wood bridge, simulating the...
Todd and Tyler of The Todd-N-Tyler Radio Empire recently broadcast live from PVS Metals in Carter Lake. While in-house, the two gave welding a try.
The Pancake Man served up fresh and fluffy pancakes to the PVS crew, demonstrating his flair for the dramatic behind the grill.
We are proud to announce a subtle but significant change to our logo and naming convention. Founded as Paxton & Vierling Iron Works in 1885, and focused primarily on our foundry and structural products, the company eventually rebranded as Paxton & Vierling...
Modern Metals commends the Slagger cutting table, a Missouri Valley Steel invention.
In August, U.S. Sen. Chuck Grassley stopped by PVS for over an hour.