Carbon Steel Coils

• Hot Roll Commercial Steel – A 1011 CS Type B (CQ) – This specification covers hot-rolled carbon steel sheets of commercial quality, in coils and cut lengths, having a maximum carbon of 0.15%. This material is intended for parts where bending, moderate forming or drawing, and welding may be involved. This specification is not intended for structural use.
  Available in: Hot Roll or Hot Roll Pickled & Oil

Structural

• ASTM A36 is a structural quality carbon steel for use in welded, bolted or riveted construction of bridges and buildings, and for general structural purposes. Minimum yield strength of 36 KSI (250MPa) is required to meet the requirements of A36. ASTM A36 plate is used in a variety of applications, which include, but are not limited to: railroad cars, trucks, agriculture equipment, trailers, construction equipment, buildings and bridges.
  – Available in: Hot Roll or Hot Roll Pickled & Oil
• A 1011-F HSLAS GR50/GR80 – This specification covers sheet hot-rolled, carbon, structural, high-strength low-alloy with improved formability, and strip, in coils and cut lengths. The addition of alloying elements raises the yield point, offering higher strength-to-weight ratios. The product is intended for applications where higher strength, savings in weight, improved formability and weldability are important.
  – Available in: Hot Roll or Hot Roll Pickled & Oil
• A1018 HSLAS-F GR50 – This specification covers heavy gauge hot-rolled, carbon, structural, high-strength low-alloy with improved formability, and strip, in coils and cut lengths. The product is intended for applications where higher strength, savings in weight, improved formability and weldability are important.
  – Available in: Hot Roll or Hot Roll Pickled & Oil
  
• ASTM A572 GR50 – A572 is a high strength, low alloy steel that offers a greater strength than plain carbon steel plates, plus ductility, weldability, formability, toughness and fatigue strength. A572 meets a minimum strength requirement (dependent on grade) and provides good workability and weldability at a moderate price. A572 plate is used in a variety of applications, which include, but are not limited to: railroad cars, trucks, trailers, agriculture equipment, construction equipment, buildings and bridges. Charpy V-notch Impact Toughness and Maximum Tensile Strength are supplementary requirements that may be requested.
  – Available in: Hot Roll or Hot Roll Pickled & Oil
• A656 GR80 – This specification covers high strength, low alloy, and hot rolled structural steel plate for use in truck frames, brackets, crane booms, rail cars, and similar applications. Steels that conform to this specification offer improved formability. These steels are normally furnished in the as-rolled condition.
  – Available in: Hot Roll or Hot Roll Pickled & Oil

Cold Rolled

• A1008 CS Type B – This specification covers cold-rolled, carbon steel sheet, in coils and cut lengths. This material is intended for parts where bending, moderate forming or drawing, and welding may be involved. This specification is not intended for structural use.